How to Program An Acura Key Fob

Ready to take your new Acura out for a spin, but want to program your Acura key fob first? We can help! Take a look below to learn the process of Acura key fob programming and more with our knowledgeable team at Acura of Johnston near Des Moines.

Acura Key Programming: Step-by-Step Guide

Not sure how to program an Acura key fob? That’s okay. We put together this step-by-step guide to help you program your Acura key fob properly. Before you start, be sure to read through the entirety of the programming instructions before attempting, as some steps require immediate action. The steps for proper Acura key fob programming are as follows:

1. Sit in the driver’s seat of your Acura vehicle and ensure the trunk as well as all doors and windows are closed.
2. While holding your key fob, turn your vehicle on.
3. Immediately after, press the lock and unlock button on the key fob once, ensuring you’re aiming your remote at the keyless receiver.
4. Turn your vehicle off and then back on again within four seconds of the previous step.
5. Then press the lock and unlock button again and repeat the process for a third time.
6. After you have completed three rounds of this, press a button on your remote to ensure the programming process has been successful.

If you’re unsure about the process, feel free to contact our service center team for assistance, or simply schedule a service appointment, and we’ll be happy to help program your Acura key fob.

Signs You Need to Replace Your Key Fob Battery

Have you already completed your key fob programming, but your fob isn’t working reliably? This is a sign that the battery is dying. If you find yourself having to press the lock/unlock buttons multiple times to get it to work properly, you may want to look into getting your key fob battery replaced.

How to Change the Battery in an Acura Key Fob

In order to perform an Acura key fob battery replacement, you’ll want to follow these simple instructions to get your key fob back in working order:

1. First, make sure you have the proper Acura key fob battery replacement, which is likely a CR2032 button cell battery. If you’re unsure which your key fob takes, you can double-check with your owner’s manual or our service team.
2. Once you have the right battery, press “tab” on your Acura key fob to remove the traditional metal key.
3. You can then use the metal key to open the outer cover on the Acura’s key.
4. After it’s open, use a flathead screwdriver to remove the dead battery.
5. You can then place the new battery in its place. Make sure the positive (+) side is up.
6. Place the fob casing back together and press until you hear a click.
7. Add the metal key back into the Acura key fob, and you’re ready to go!

If you’re still experiencing issues after completing the replacement process, don’t hesitate to contact our service team or parts center for more assistance.

Rely on Acura of Johnston for Acura Key Programming

Now that you know how to program an Acura key fob, you should be all set to tackle the Des Moines and Cedar Rapids roads again. If you have any more questions, feel free to reach out to our team.